Lab-grade IAQ Monitor
FLO2 IAQ
14+ parameter indoor air quality monitor with continuous cloud logging and certification-grade reporting.
GreenPro Certified · CII, 2025
Lab-grade IAQ Monitor
14+ parameter indoor air quality monitor with continuous cloud logging and certification-grade reporting.
GreenPro Certified · CII, 2025
Most buildings have no continuous record of the air quality conditions their occupants work and live in. Periodic manual measurements produce a point-in-time reading that certification submissions then treat as a proxy for year-round conditions.
FLO2 IAQ monitors 14+ parameters continuously, logs every reading to the cloud and makes that data available in real time on any device. The outcome is a complete, timestamped record of indoor conditions that supports both operational decisions and compliance submissions without additional data collection.
Step 1
Pre-calibrated sensors capture gases, particulates and environmental conditions simultaneously, every minute, throughout the operating day. No manual activation, no sampling intervals, no gaps.
Step 2
An ambient status indicator on the device face shows current air quality at a glance: green for good, yellow for moderate, red for poor.
Step 3
Configurable thresholds trigger notifications when any parameter exceeds acceptable levels, without requiring active monitoring of the dashboard.
Step 4
Historical data, trend graphs and compliance exports are available from the cloud dashboard at any time, structured for submission without manual assembly.
13 distinct parameters across gases, particulates and environmental conditions, sampled continuously.
HCHO (formaldehyde) monitoring is particularly relevant in new and recently refurbished buildings, where off-gassing from construction materials and furnishings is highest in the first two years of occupancy and typically goes undetected without continuous sensing.
Every reading flows to a cloud dashboard accessible on any device. Operations teams see live AQI, gas, particulate and environmental values for every connected site in one view.
Parameters monitored
14+
Coverage
Up to 3,000 sq ft per unit
Connectivity
Wi-Fi 2.4 GHz, LoRa, all BMS protocols
Operating conditions
0 to 50 °C, up to 95% RH
Certification
GreenPro, CII Green Products and Services Council
Power
Mains wired, no battery dependency
Mounting
Wall mount, 110 to 150 cm height (breathing zone)
Dashboard
Cloud-based, multi-device, real-time
Warranty
2 years
Why wired matters
Battery-dependent monitors introduce the possibility of data gaps at the moments that matter most. A discharge during a high-occupancy event, a regulatory inspection or a certification audit produces an incomplete record that undermines the purpose of continuous monitoring.
FLO2 IAQ is mains-powered. Monitoring runs uninterrupted, 24 hours a day.
Structured for IGBC, LEED, WELL, GRIHA, RESET, ESG and BRSR disclosures.
A site assessment identifies pollutant levels by zone, ventilation gaps and reporting requirements under applicable certification frameworks.